|
You Are Here: Shop By Category | Video Switches | Cat5 Audio Video Matrix Switch | Cat5 Audio Video Matrix 16 in 8 out SNX16X08
|
StoreFront
|
|
|
Cat5 Audio Video Matrix 16 in 8 out SNX16X08
Description:
Overview The SmartNet-X SNX16X08 is a high-quality Cat5 AV Router switching matrix for video and stereo audio type signals. All signal formats are catered for including VGA, SVGA, XGA and UXGA. Standard VGA connectors (HD15 sockets) are used on the rear for ease of installation for video connectivity and RCAs for computer audio. The units contain a very high bandwidth (400MHz) routing matrix for the Red, Green and Blue video channels and separate switching layers for stereo audio. The color signals and are then balanced internally and combined with the audio signals. This combined signal is then driven out through standard RJ45s on the front panel. Standard SmartNet-X receiver units are used at the end on each CAT5 cable to recover the signals. High quality receiver circuits incorporating cable loss compensation provide excellent results up to resolutions of 1600 x 1200 @85Hz. Compatible with all types of UTP and STP cable, the receivers can have optional internal skew compensation fitted, which solves the problem of delay errors found in the higher specification structured cabling.
The Main Transmitter Signal distribution All signals are distributed, balanced and driven differentially. This method provides for the best immunity to external noise and interference. Sending signals balanced also minimizes emissions, as any interference transmissions from the cable are cancelled out. 3 Pairs of the CAT5 cable are used for the three colors and the stereo audio. Pair 4 is used for inline power and the returned Infrared signals from the user.
Control SmartAVI SNX16X08 CA5 AV router unit can be controlled via a RS422 port connecting via a RJ45 on the front of the main chassis. Two connectors are provided for expansion, allowing a simple Cat5 patch cable to link to additional units. An adjustable rotary switch allows each unit to be assigned a unique ID read when the unit is first powered up. An optional Windows application (SmartNetControl) is available including a RS232 to RS422 converter. In addition to the centralized control from a computer, each output can be selected individually at the remote receiver location. Each SmartAVI SmartNet-X receiver unit also has an optional IR eye. Using an IR handset or other third party system, each output can be selected by simply pressing the appropriate number corresponding to the input source number. Once selected the source device can now be controlled from the remote location providing full IR interactivity.
Local audio output To help accommodate multi-room audio systems, there is an option for local audio output on the front of the unit. The audio is presented as dual RCAs for the stereo pair. Output drivers allow the audio to be connected to any amplifier input at line level. The audio will follow whichever source device is selected.
The Receiver The dual screen receiver has the capability to allow the user to select input from each source device from his remote position using RS232 control or Infrared. It is also capable of driving the same video and audio signals to two independent devices.
Single screen receiver The compact single screen receiver is used when no control is required. Being single screen, the unit is designed to drive a single display.
Cable compensation - Expected Owing to expected losses in the UTP cable, provisions are made for compensating the attenuation of the Video signal. For each color there is an equalization adjustment potentiometer. This arrangement enables compensation for more than 300m of CAT5 cable. There is an LED indicator on the side of the receiver unit denoting local power status. The LED illuminates when the receiver unit is connected to the appropriate transmitter showing inline power. An optional DC power connection is also available; this feature is used in a point-to-point application to enable powering of the transmitter from the receiver unit.
IP Access
There is an additional option for TCP/IP and telnet control that allows you to access and control Cat5 AV Router SNX16X08 unit remotely over IP.
Please call us @866-999-3210 for Government, Corporate and Educational Pricing.
Item Number: #SNX16X08
|
|
Product Features
|
SNX16X08 AV Router Features |
|
· |
High Quality Video and Audio Switching |
|
· |
High Video Resolution up to 1600 x 1200 |
|
· |
InfraRed and RS422 control |
|
· |
PC Windows software control |
|
· |
Integral UTP distribution |
|
· |
Cable compensation up to 300m |
|
· |
Compact metal housing for receivers |
|
· |
Can be mixed with other video signal (RGB, YUV, RGBS) |
|
· |
Optional TCP / IP Access |
|
SNX16X08 AV Matrix Router Specifications
|
ITEM
|
DESCRIPTION |
|
Video
|
|
Bandwidth |
400MHz |
|
Input Signal Level |
1Volt pk-pk into 75R |
|
Output Impedance |
100 Ohms |
|
Input Impedance |
75R Ohms |
|
Connector |
HD15 socket |
|
Format |
VGA/SVGA/XGA/RGBHV/RGsB/CVBS/YC/YUV/RGBS |
|
Syncs |
TTL5VDC |
|
Bandwidth |
Horizontal Sync up to 85KHz |
|
Audio |
|
Signal
|
15KHz 0dB unbalanced 100ohms impedance |
|
Connector |
RCA or 3.5mm Stereo Jack |
|
Power |
|
Voltage |
90-230V IEC 1A A/S 50/60 Hz |
|
Control |
|
IR |
Individual Control |
|
RS422 |
Dual RJ45 Sockets |
|
Dimensions |
|
Height x Width x Depth |
2U (88mm) x 19" x 450mm |
|
Weight |
20 lbs. |
|
|
|
Associated Items
|

UXGA/Audio Point to Point Receiver unit SLX-RX100
Retail Price: $300.00
Sale Price: $220.00
View Details
|
 |

UXGA/Audio/RS232/IR Point to Point CAT5 Receiver unit SLX-RX200
Retail Price: $300.00
Sale Price: $220.00
View Details
|
|