http://www.smartvm.com/-c6520.htm Cat5 Audio Video Matrix Switch Copyright 2012 SmartVM Saturday, February 11, 2012 08:16 GMT Overview The SmartNet-X SNX08X08 is a high-quality Cat5 AV Router switching matrix for video and stereo audio type signals. All signal formats are catered for including VGA, SVGA, XGA and UXGA. Standard VGA connectors (HD15 sockets) are used on the rear for ease of installation for video connectivity and RCAs for computer audio. The units contain a very high bandwidth (400MHz) routing matrix for the Red, Green and Blue video channels and separate switching layers for stereo audio. The color signals and are then balanced internally and combined with the audio signals. This combined signal is then driven out through standard RJ45s on the front panel. Standard SmartNet-X receiver units are used at the end on each CAT5 cable to recover the signals. High quality receiver circuits incorporating cable loss compensation provide excellent results up to resolutions of 1600 x 1200 @85Hz. Compatible with all types of UTP and STP cable, the receivers can have optional internal skew compensation fitted, which solves the problem of delay errors found in the higher specification structured cabling. The Main Transmitter Signal distribution All signals are distributed, balanced and driven differentially. This method provides for the best immunity to external noise and interference. Sending signals balanced also minimizes emissions, as any interference transmissions from the cable are cancelled out. 3 Pairs of the CAT5 cable are used for the three colors and the stereo audio. Pair 4 is used for inline power and the returned Infrared signals from the user. Control SmartAVI SNX08X08 CA5 AV router unit can be controlled via a RS422 port connecting via a RJ45 on the front of the main chassis. Two connectors are provided for expansion, allowing a simple Cat5 patch cable to link to additional units. An adjustable rotary switch allows each unit to be assigned a unique ID read when the unit is first powered up. An optional Windows application (SmartNetControl) is available including a RS232 to RS422 converter. In addition to the centralized control from a computer, each output can be selected individually at the remote receiver location. Each SmartAVI SmartNet-X receiver unit also has an optional IR eye. Using an IR handset or other third party system, each output can be selected by simply pressing the appropriate number corresponding to the input source number. Once selected the source device can now be controlled from the remote location providing full IR interactivity. Local audio output To help accommodate multi-room audio systems, there is an option for local audio output on the front of the unit. The audio is presented as dual RCAs for the stereo pair. Output drivers allow the audio to be connected to any amplifier input at line level. The audio will follow whichever source device is selected. The Receiver The dual screen receiver has the capability to allow the user to select input from each source device from his remote position using RS232 control or Infrared. It is also capable of driving the same video and audio signals to two independent devices. Single screen receiver The compact single screen receiver is used when no control is required. Being single screen, the unit is designed to drive a single display. Cable compensation - Expected Owing to expected losses in the UTP cable, provisions are made for compensating the attenuation of the Video signal. For each color there is an equalization adjustment potentiometer. This arrangement enables compensation for more than 300m of CAT5 cable. There is an LED indicator on the side of the receiver unit denoting local power status. The LED illuminates when the receiver unit is connected to the appropriate transmitter showing inline power. An optional DC power connection is also available; this feature is used in a point-to-point application to enable powering of the transmitter from the receiver unit. IP Access There is an additional option for TCP/IP and telnet control that allows you to access and control Cat5 AV Router SNX08X08 unit remotely over IP. Please call us @866-999-3210 for Government, Corporate and Educational Pricing. Cat5 Audio Video Matrix Switch http://www.smartvm.com/cat5-audio-video-matrix-8-in-8-out-snx08x08-p23791.htm http://www.smartvm.com/ImagesCache/cat5-audio-video-matrix-8-in-8-out-snx08x08-i12884.jpg http://www.smartvm.com/cat5-audio-video-matrix-8-in-8-out-snx08x08-p23791.htm new SNX08X08 5385 Video Switches > Cat5 Audio Video Matrix Switch 45 lb 7 June 2011 08:16 CST Overview The SmartNet-X SNX16X04 is a high-quality Cat5 AV Router switching matrix for video and stereo audio type signals. All signal formats are catered for including VGA, SVGA, XGA and UXGA. Standard VGA connectors (HD15 sockets) are used on the rear for ease of installation for video connectivity and RCAs for computer audio. The units contain a very high bandwidth (400MHz) routing matrix for the Red, Green and Blue video channels and separate switching layers for stereo audio. The color signals and are then balanced internally and combined with the audio signals. This combined signal is then driven out through standard RJ45s on the front panel. Standard SmartNet-X receiver units are used at the end on each CAT5 cable to recover the signals. High quality receiver circuits incorporating cable loss compensation provide excellent results up to resolutions of 1600 x 1200 @85Hz. Compatible with all types of UTP and STP cable, the receivers can have optional internal skew compensation fitted, which solves the problem of delay errors found in the higher specification structured cabling. The Main Transmitter Signal distribution All signals are distributed, balanced and driven differentially. This method provides for the best immunity to external noise and interference. Sending signals balanced also minimizes emissions, as any interference transmissions from the cable are cancelled out. 3 Pairs of the CAT5 cable are used for the three colors and the stereo audio. Pair 4 is used for inline power and the returned Infrared signals from the user. Control SmartAVI SNX16X04 CA5 AV router unit can be controlled via a RS422 port connecting via a RJ45 on the front of the main chassis. Two connectors are provided for expansion, allowing a simple Cat5 patch cable to link to additional units. An adjustable rotary switch allows each unit to be assigned a unique ID read when the unit is first powered up. An optional Windows application (SmartNetControl) is available including a RS232 to RS422 converter. In addition to the centralized control from a computer, each output can be selected individually at the remote receiver location. Each SmartAVI SmartNet-X receiver unit also has an optional IR eye. Using an IR handset or other third party system, each output can be selected by simply pressing the appropriate number corresponding to the input source number. Once selected the source device can now be controlled from the remote location providing full IR interactivity. Local audio output To help accommodate multi-room audio systems, there is an option for local audio output on the front of the unit. The audio is presented as dual RCAs for the stereo pair. Output drivers allow the audio to be connected to any amplifier input at line level. The audio will follow whichever source device is selected. The Receiver The dual screen receiver has the capability to allow the user to select input from each source device from his remote position using RS232 control or Infrared. It is also capable of driving the same video and audio signals to two independent devices. Single screen receiver The compact single screen receiver is used when no control is required. Being single screen, the unit is designed to drive a single display. Cable compensation - Expected Owing to expected losses in the UTP cable, provisions are made for compensating the attenuation of the Video signal. For each color there is an equalization adjustment potentiometer. This arrangement enables compensation for more than 300m of CAT5 cable. There is an LED indicator on the side of the receiver unit denoting local power status. The LED illuminates when the receiver unit is connected to the appropriate transmitter showing inline power. An optional DC power connection is also available; this feature is used in a point-to-point application to enable powering of the transmitter from the receiver unit. IP Access There is an additional option for TCP/IP and telnet control that allows you to access and control Cat5 AV Router SNX16X04 unit remotely over IP. Please call us @866-999-3210 for Government, Corporate and Educational Pricing. Cat5 Audio Video Matrix Switch http://www.smartvm.com/cat5-audio-video-matrix-16-in-4-out-snx16x04-p23793.htm http://www.smartvm.com/ImagesCache/cat5-audio-video-matrix-16-in-4-out-snx16x04--i12888.jpg http://www.smartvm.com/cat5-audio-video-matrix-16-in-4-out-snx16x04-p23793.htm new SNX16X04 6291 Video Switches > Cat5 Audio Video Matrix Switch 45 lb 7 June 2011 08:16 CST The SmartNet-X SNX16X08S is a high-quality Cat5 AV Router switching matrix for video and stereo audio type signals. All signal formats are catered for including VGA, SVGA, XGA and UXGA. Standard VGA connectors (HD15 sockets) are used on the rear for ease of installation for video connectivity and RCAs for computer audio. The units contain a very high bandwidth (400MHz) routing matrix for the Red, Green and Blue video channels and separate switching layers for stereo audio. The color signals and are then balanced internally and combined with the audio signals. This combined signal is then driven out through standard RJ45s on the front panel. Standard SmartNet-X receiver units are used at the end on each CAT5 cable to recover the signals. High quality receiver circuits incorporating cable loss compensation provide excellent results up to resolutions of 1600 x 1200 @85Hz. Compatible with all types of UTP and STP cable, the receivers can have optional internal skew compensation fitted, which solves the problem of delay errors found in the higher specification structured cabling. The Main Transmitter Signal distribution All signals are distributed, balanced and driven differentially. This method provides for the best immunity to external noise and interference. Sending signals balanced also minimizes emissions, as any interference transmissions from the cable are cancelled out. 3 Pairs of the CAT5 cable are used for the three colors and the stereo audio. Pair 4 is used for inline power and the returned Infrared signals from the user. Control SmartAVI SNX16X08S CAT5 AV router unit can be controlled via a RS422 port connecting via a RJ45 on the front of the main chassis. Two connectors are provided for expansion, allowing a simple Cat5 patch cable to link to additional units. An adjustable rotary switch allows each unit to be assigned a unique ID read when the unit is first powered up. An optional Windows application (SmartNetControl) is available including a RS232 to RS422 converter. In addition to the centralized control from a computer, each output can be selected individually at the remote receiver location. Each SmartAVI SmartNet-X receiver unit also has an optional IR eye. Using an IR handset or other third party system, each output can be selected by simply pressing the appropriate number corresponding to the input source number. Once selected the source device can now be controlled from the remote location providing full IR interactivity. Local audio output To help accommodate multi-room audio systems, there is an option for local audio output on the front of the unit. The audio is presented as dual RCAs for the stereo pair. Output drivers allow the audio to be connected to any amplifier input at line level. The audio will follow whichever source device is selected. The Receiver The dual screen receiver has the capability to allow the user to select input from each source device from his remote position using RS232 control or Infrared. It is also capable of driving the same video and audio signals to two independent devices. Single screen receiver The compact single screen receiver is used when no control is required. Being single screen, the unit is designed to drive a single display. Cable compensation - Expected Owing to expected losses in the UTP cable, provisions are made for compensating the attenuation of the Video signal. For each color there is an equalization adjustment potentiometer. This arrangement enables compensation for more than 300m of CAT5 cable. There is an LED indicator on the side of the receiver unit denoting local power status. The LED illuminates when the receiver unit is connected to the appropriate transmitter showing inline power. An optional DC power connection is also available; this feature is used in a point-to-point application to enable powering of the transmitter from the receiver unit. IP Access There is an additional option for TCP/IP and telnet control that allows you to access and control Cat5 AV Router SNX16X08S unit remotely over IP. Cat5 Audio Video Matrix Switch http://www.smartvm.com/smartavi-cat5-audio-video-matrix-16-in-8-out-snx16x08s-p23794.htm http://www.smartvm.com/ImagesCache/smartavi-cat5-audio-video-matrix-16-in-8-out-snx16x08s-i13284.jpg http://www.smartvm.com/smartavi-cat5-audio-video-matrix-16-in-8-out-snx16x08s-p23794.htm SmartAVI new SNX16X08S 7999 Video Switches > Cat5 Audio Video Matrix Switch 45 lb 3 January 2012 08:16 CST The SmartNet-X SNX16X16S is a high-quality Cat5 AV Router switching matrix for video and stereo audio type signals. All signal formats are catered for including VGA, SVGA, XGA and UXGA. Standard VGA connectors (HD15 sockets) are used on the rear for ease of installation for video connectivity and RCAs for computer audio. The units contain a very high bandwidth (400MHz) routing matrix for the Red, Green and Blue video channels and separate switching layers for stereo audio. The color signals and are then balanced internally and combined with the audio signals. This combined signal is then driven out through standard RJ45s on the front panel. Standard SmartNet-X receiver units are used at the end on each CAT5 cable to recover the signals. High quality receiver circuits incorporating cable loss compensation provide excellent results up to resolutions of 1600 x 1200 @85Hz. Compatible with all types of UTP and STP cable, the receivers can have optional internal skew compensation fitted, which solves the problem of delay errors found in the higher specification structured cabling. The Main Transmitter Signal distribution All signals are distributed, balanced and driven differentially. This method provides for the best immunity to external noise and interference. Sending signals balanced also minimizes emissions, as any interference transmissions from the cable are cancelled out. 3 Pairs of the CAT5 cable are used for the three colors and the stereo audio. Pair 4 is used for inline power and the returned Infrared signals from the user. Control SmartAVI SNX16X16S CAT5 AV router unit can be controlled via a RS422 port connecting via a RJ45 on the front of the main chassis. Two connectors are provided for expansion, allowing a simple Cat5 patch cable to link to additional units. An adjustable rotary switch allows each unit to be assigned a unique ID read when the unit is first powered up. An optional Windows application (SmartNetControl) is available including a RS232 to RS422 converter. In addition to the centralized control from a computer, each output can be selected individually at the remote receiver location. Each SmartAVI SmartNet-X receiver unit also has an optional IR eye. Using an IR handset or other third party system, each output can be selected by simply pressing the appropriate number corresponding to the input source number. Once selected the source device can now be controlled from the remote location providing full IR interactivity. Local audio output To help accommodate multi-room audio systems, there is an option for local audio output on the front of the unit. The audio is presented as dual RCAs for the stereo pair. Output drivers allow the audio to be connected to any amplifier input at line level. The audio will follow whichever source device is selected. The Receiver The dual screen receiver has the capability to allow the user to select input from each source device from his remote position using RS232 control or Infrared. It is also capable of driving the same video and audio signals to two independent devices. Single screen receiver The compact single screen receiver is used when no control is required. Being single screen, the unit is designed to drive a single display. Cable compensation - Expected Owing to expected losses in the UTP cable, provisions are made for compensating the attenuation of the Video signal. For each color there is an equalization adjustment potentiometer. This arrangement enables compensation for more than 300m of CAT5 cable. There is an LED indicator on the side of the receiver unit denoting local power status. The LED illuminates when the receiver unit is connected to the appropriate transmitter showing inline power. An optional DC power connection is also available; this feature is used in a point-to-point application to enable powering of the transmitter from the receiver unit. IP Access There is an additional option for TCP/IP and telnet control that allows you to access and control Cat5 AV Router SNX16X16S unit remotely over IP. Cat5 Audio Video Matrix Switch http://www.smartvm.com/smartavi-cat5-audio-video-matrix-16-in-16-out-snx16x16s-p23795.htm http://www.smartvm.com/ImagesCache/smartavi-cat5-audio-video-matrix-16-in-16-out-snx16x16s-i13286.jpg http://www.smartvm.com/smartavi-cat5-audio-video-matrix-16-in-16-out-snx16x16s-p23795.htm SmartAVI new SNX16X16S 8490 Video Switches > Cat5 Audio Video Matrix Switch 45 lb 3 January 2012 08:16 CST The SmartNet-X SNX32X16S is a high-quality Cat5 AV Router switching matrix for video and stereo audio type signals. All signal formats are catered for including VGA, SVGA, XGA and UXGA. Standard VGA connectors (HD15 sockets) are used on the rear for ease of installation for video connectivity and RCAs for computer audio. The units contain a very high bandwidth (400MHz) routing matrix for the Red, Green and Blue video channels and separate switching layers for stereo audio. The color signals and are then balanced internally and combined with the audio signals. This combined signal is then driven out through standard RJ45s on the front panel. Standard SmartNet-X receiver units are used at the end on each CAT5 cable to recover the signals. High quality receiver circuits incorporating cable loss compensation provide excellent results up to resolutions of 1600 x 1200 @85Hz. Compatible with all types of UTP and STP cable, the receivers can have optional internal skew compensation fitted, which solves the problem of delay errors found in the higher specification structured cabling. The Main Transmitter Signal distribution All signals are distributed, balanced and driven differentially. This method provides for the best immunity to external noise and interference. Sending signals balanced also minimizes emissions, as any interference transmissions from the cable are cancelled out. 3 Pairs of the CAT5 cable are used for the three colors and the stereo audio. Pair 4 is used for inline power and the returned Infrared signals from the user. Control SmartAVI SNX32X16S CAT5 AV router unit can be controlled via a RS422 port connecting via a RJ45 on the front of the main chassis. Two connectors are provided for expansion, allowing a simple Cat5 patch cable to link to additional units. An adjustable rotary switch allows each unit to be assigned a unique ID read when the unit is first powered up. An optional Windows application (SmartNetControl) is available including a RS232 to RS422 converter. In addition to the centralized control from a computer, each output can be selected individually at the remote receiver location. Each SmartAVI SmartNet-X receiver unit also has an optional IR eye. Using an IR handset or other third party system, each output can be selected by simply pressing the appropriate number corresponding to the input source number. Once selected the source device can now be controlled from the remote location providing full IR interactivity. Local audio output To help accommodate multi-room audio systems, there is an option for local audio output on the front of the unit. The audio is presented as dual RCAs for the stereo pair. Output drivers allow the audio to be connected to any amplifier input at line level. The audio will follow whichever source device is selected. The Receiver The dual screen receiver has the capability to allow the user to select input from each source device from his remote position using RS232 control or Infrared. It is also capable of driving the same video and audio signals to two independent devices. Single screen receiver The compact single screen receiver is used when no control is required. Being single screen, the unit is designed to drive a single display. Cable compensation - Expected Owing to expected losses in the UTP cable, provisions are made for compensating the attenuation of the Video signal. For each color there is an equalization adjustment potentiometer. This arrangement enables compensation for more than 300m of CAT5 cable. There is an LED indicator on the side of the receiver unit denoting local power status. The LED illuminates when the receiver unit is connected to the appropriate transmitter showing inline power. An optional DC power connection is also available; this feature is used in a point-to-point application to enable powering of the transmitter from the receiver unit. IP Access There is an additional option for TCP/IP and telnet control that allows you to access and control Cat5 AV Router SNX32X16S unit remotely over IP. Cat5 Audio Video Matrix Switch http://www.smartvm.com/smartavi-cat5-audio-video-matrix-32-in-16-out-snx32x16s-p23796.htm http://www.smartvm.com/ImagesCache/smartavi-cat5-audio-video-matrix-32-in-16-out-snx32x16s-i13842.jpg http://www.smartvm.com/smartavi-cat5-audio-video-matrix-32-in-16-out-snx32x16s-p23796.htm SmartAVI new SNX32X16S 14400 Video Switches > Cat5 Audio Video Matrix Switch 60 lb 3 January 2012 08:16 CST The SLX-RX100 is an UXGA/Audio point to point CAT5 receiver unit for Cat5 AV Router. Cat5 Audio Video Matrix Switch http://www.smartvm.com/uxgaaudio-point-to-point-receiver-unit-slx-rx100-p23797.htm http://www.smartvm.com/ImagesCache/uxgaaudio-point-to-point-receiver-unit-slx-rx100-i14340.jpg http://www.smartvm.com/uxgaaudio-point-to-point-receiver-unit-slx-rx100-p23797.htm new XTP-RXS 220 Video Switches > Cat5 Audio Video Matrix Switch 6 lb 27 March 2009 08:16 CST The SLX-RX200 is an UXGA/Audio/RS232/IR point to point CAT5 receiver unit for Cat5 AV Router. Cat5 Audio Video Matrix Switch http://www.smartvm.com/uxgaaudiors232ir-point-to-point-cat5-receiver-unit-slx-rx200-p23798.htm http://www.smartvm.com/ImagesCache/uxgaaudiors232ir-point-to-point-cat5-receiver-unit-slx-rx200-i14341.jpg http://www.smartvm.com/uxgaaudiors232ir-point-to-point-cat5-receiver-unit-slx-rx200-p23798.htm new XTP-RXS 220 Video Switches > Cat5 Audio Video Matrix Switch 6 lb 27 March 2009 08:16 CST High Definition HDTV CAT5/6 Video Matrix Switch for XGA, Component Video, Composite Video and S-Video with full stereo audio support and optional full IR/RS232 non-blocking matrix switching. Switch up to 16 remote devices to 16 remote displays located up to 1500ft away. You can control this Video Matrix Switcher with PC software, RS/232, IR or through the Internet. CAT5 Video Matrix Switch routes audio and video signals from several different video sources out to multiple displays (projectors, monitors, etc.) and speakers via inexpensive Cat5/6 UTP cable. Video Matrix Switch via CAT5/6 is capable of connecting to as many as 16 video sources via transmitters and 16 video displays via receivers with a maximum extension of 1500 feet between the transmitter and receiver units. A single audio/video output can be routed to one or multiple destinations. Video is transmitted at a resolution of 1900 x 1200 to insure high resolution images. Buffered video outputs and analog delivery of stereo audio maintains optimum integrity throughout the system. Special remote boxes offer compatibility with Video Composite, UXGA, Component Video and S-Video. Applications for CAT 5/6 Video Matrix Switcher Access Enables easy access to multiple servers in various locations. It also facilitates data sharing among departments. Security Safeguards the servers by storing them in a secure and climate controlled environment while still providing access from the production floor. Savings Saves in equipment costs, physical space and utilities expense. Productivity Increases productivity by facilitating testing and performance evaluation of software and equipment, on multiple servers, from a single keyboard mouse and monitor station. Multimedia Presentations Can be used in multimedia presentations, where the information is transmitted from various computers. Please call us @ 866-999-3210 for Government, Corporate, Reseller and Educational Pricing. Cat5 Audio Video Matrix Switch http://www.smartvm.com/cat5-audio-video-matrix-switch-8x8-with-rs232-control-csw08x08s-p40373.htm http://www.smartvm.com/ImagesCache/cat5-audio-video-matrix-switch-8x8-with-rs232-control-csw08x08s-i24976.jpg http://www.smartvm.com/cat5-audio-video-matrix-switch-8x8-with-rs232-control-csw08x08s-p40373.htm new CSW08X08S 3135 Video Switches > Cat5 Audio Video Matrix Switch 42 lb 7 June 2011 08:16 CST High Definition HDTV CAT5/6 Video Matrix Switch for XGA, Component Video, Composite Video and S-Video with full stereo audio support and optional full IR/RS232 non-blocking matrix switching. Switch up to 16 remote devices to 16 remote displays located up to 1500ft away. You can control this Video Matrix Switcher with PC software, RS/232, IR or through the Internet. CAT5 Video Matrix Switch routes audio and video signals from several different video sources out to multiple displays (projectors, monitors, etc.) and speakers via inexpensive Cat5/6 UTP cable. Video Matrix Switch via CAT5/6 is capable of connecting to as many as 16 video sources via transmitters and 16 video displays via receivers with a maximum extension of 1500 feet between the transmitter and receiver units. A single audio/video output can be routed to one or multiple destinations. Video is transmitted at a resolution of 1900 x 1200 to insure high resolution images. Buffered video outputs and analog delivery of stereo audio maintains optimum integrity throughout the system. Special remote boxes offer compatibility with Video Composite, UXGA, Component Video and S-Video. Applications for CAT 5/6 Video Matrix Switch Access Enables easy access to multiple servers in various locations. It also facilitates data sharing among departments. Security Safeguards the servers by storing them in a secure and climate controlled environment while still providing access from the production floor. Savings Saves in equipment costs, physical space and utilities expense. Productivity Increases productivity by facilitating testing and performance evaluation of software and equipment, on multiple servers, from a single keyboard mouse and monitor station. Multimedia Presentations Can be used in multimedia presentations, where the information is transmitted from various computers. Please call us @ 866-999-3210 for Government, Corporate, Reseller and Educational Pricing. Cat5 Audio Video Matrix Switch http://www.smartvm.com/cat5-audio-video-matrix-switch-16x8-with-rs232-control-csw16x08s-p40374.htm http://www.smartvm.com/ImagesCache/cat5-audio-video-matrix-switch-16x8-with-rs232-control-csw16x08s-i24977.jpg http://www.smartvm.com/cat5-audio-video-matrix-switch-16x8-with-rs232-control-csw16x08s-p40374.htm new CSW16X08S 3324 Video Switches > Cat5 Audio Video Matrix Switch 45 lb 7 June 2011 08:16 CST High Definition HDTV CAT5/6 Video Matrix Switch for XGA, Component Video, Composite Video and S-Video with full stereo audio support and optional full IR/RS232 non-blocking matrix switching. Switch up to 16 remote devices to 16 remote displays located up to 1500ft away. You can control this Video Matrix Switcher with PC software, RS/232, IR or through the Internet. CAT5 Video Matrix Switch routes audio and video signals from several different video sources out to multiple displays (projectors, monitors, etc.) and speakers via inexpensive Cat5/6 UTP cable. Video Matrix Switcher via CAT5/6 is capable of connecting to as many as 16 video sources via transmitters and 16 video displays via receivers with a maximum extension of 1500 feet between the transmitter and receiver units. A single audio/video output can be routed to one or multiple destinations. Video is transmitted at a resolution of 1900 x 1200 to insure high resolution images. Buffered video outputs and analog delivery of stereo audio maintains optimum integrity throughout the system. Special remote boxes offer compatibility with Video Composite, UXGA, Component Video and S-Video. Applications for CAT 5/6 Video Matrix Switch Access Enables easy access to multiple servers in various locations. It also facilitates data sharing among departments. Security Safeguards the servers by storing them in a secure and climate controlled environment while still providing access from the production floor. Savings Saves in equipment costs, physical space and utilities expense. Productivity Increases productivity by facilitating testing and performance evaluation of software and equipment, on multiple servers, from a single keyboard mouse and monitor station. Multimedia Presentations Can be used in multimedia presentations, where the information is transmitted from various computers. Please call us @ 866-999-3210 for Government, Corporate, Reseller and Educational Pricing. Cat5 Audio Video Matrix Switch http://www.smartvm.com/cat5-audio-video-matrix-switch-16x16-with-rs232-control-csw16x16s-p40375.htm http://www.smartvm.com/ImagesCache/cat5-audio-video-matrix-switch-16x16-with-rs232-control-csw16x16s-i24978.jpg http://www.smartvm.com/cat5-audio-video-matrix-switch-16x16-with-rs232-control-csw16x16s-p40375.htm new CSW16X16S 4086 Video Switches > Cat5 Audio Video Matrix Switch 0.1 lb 7 June 2011 08:16 CST The XTP-TXS is an UXGA/Audio/RS232/IR point to point CAT5 Transmitter with Local Video for Cat5 AV Router CSW Series. Cat5 Audio Video Matrix Switch http://www.smartvm.com/xtpro-uxgaaudiors232ir-point-to-point-cat5-transmitter-with-local-video-p40376.htm http://www.smartvm.com/ImagesCache/xtpro-uxgaaudiors232ir-point-to-point-cat5-transmitter-with-local-video-i24979.jpg http://www.smartvm.com/xtpro-uxgaaudiors232ir-point-to-point-cat5-transmitter-with-local-video-p40376.htm new XTP-TXS 171 Video Switches > Cat5 Audio Video Matrix Switch 6 lb 9 October 2008 08:16 CST The XTP-RXS is an UXGA/Audio/RS232/IR point to point CAT5 Receiver with Local Video for Cat5 AV Router CSW Series. Cat5 Audio Video Matrix Switch http://www.smartvm.com/xtpro-uxgaaudiors232ir-receiver-with-dual-video-p40377.htm http://www.smartvm.com/ImagesCache/xtpro-uxgaaudiors232ir-receiver-with-dual-video-i24980.jpg http://www.smartvm.com/xtpro-uxgaaudiors232ir-receiver-with-dual-video-p40377.htm new XTP-RXS 220 Video Switches > Cat5 Audio Video Matrix Switch 6 lb 27 March 2009 08:16 CST The XTP-RXLS is an UXGA/Audio/RS232/IR Long Range CAT5 Receiver with Local Video for Cat5 AV Router CSW Series. Cat5 Audio Video Matrix Switch http://www.smartvm.com/xtpro-uxgaaudiors232ir-long-range-receiver-p40378.htm http://www.smartvm.com/ImagesCache/xtpro-uxgaaudiors232ir-long-range-receiver-i24981.jpg http://www.smartvm.com/xtpro-uxgaaudiors232ir-long-range-receiver-p40378.htm new XTP-RXLS 300 Video Switches > Cat5 Audio Video Matrix Switch 6 lb 27 March 2009 08:16 CST Extend UXGA and stereo audio signals up to 250ft from the source with the XTA-TXS UXGA and Audio CAT5 Transmitter when connected via affordable CAT5 cable. This compact enclosure is ideal for data broadcasting, presentations, and more. Cat5 Audio Video Matrix Switch http://www.smartvm.com/xta-txs-uxga-and-audio-cat5-transmitter-p43032.htm http://www.smartvm.com/ImagesCache/xta-txs-uxga-and-audio-cat5-transmitter-i28367.jpg http://www.smartvm.com/xta-txs-uxga-and-audio-cat5-transmitter-p43032.htm new XTA-TXS 120 Video Switches > Cat5 Audio Video Matrix Switch 3 lb 3 November 2009 08:16 CST Extend UXGA and stereo audio signals up to 1000ft from their source with the XTA-RXS UXGA and Audio CAT5 Receiver when connected via affordable CAT5 cable. This compact enclosure is ideal for data broadcasting, presentations, and more. Cat5 Audio Video Matrix Switch http://www.smartvm.com/xta-rxs-uxga-and-audio-cat5-receiver-p43033.htm http://www.smartvm.com/ImagesCache/xta-rxs-uxga-and-audio-cat5-receiver-i28368.jpg http://www.smartvm.com/xta-rxs-uxga-and-audio-cat5-receiver-p43033.htm new XTA-RXS 177 Video Switches > Cat5 Audio Video Matrix Switch 3 lb 3 November 2009 08:16 CST SB-8188CT is a true CAT5 Matrix Routing Switcher for VGA(RGBHV) / Stereo Audio (AR/AL) singals. It is an 8 VGA(RGBHV) / Stereo Audio (AR/AL) inputs with 8 individual CAT5 VGA(RGBHV) / Audio outputs and 1x preview output. Because it is a matrix router, any input may be routed to any output; or the same input may be routed to all outputs or any combination. It completely eliminates the need to constantly move around VGA input and output cables. The SB8188CT is useful for Matrix signals from VGA source devices (such as Personal computer, set top box, and satellite receivers, etc. ) Control is provided via front pressed buttons with LED readout or IR remote controller. A RS 232 interface is provided for interfacing with third party control.A Windows-based control software package is included to provide complete control of the SB8188 from a PC. Please note VGA Video and Audio Remote Receivers are not included and must be purchased separately along with the Cat5 Video Matrix Switch for correct functionality. See below for details. Cat5 Audio Video Matrix Switch http://www.smartvm.com/shinybow-8x8-vga-audio-cat5-matrix-switch-rackmount-with-rs232-and-infra-red-remote-sb-8188ct-p44876.htm http://www.smartvm.com/ImagesCache/shinybow-8x8-vga-audio-cat5-matrix-switch-rackmount-with-rs232-and-infra-red-remote-sb-8188ct-i30988.jpg http://www.smartvm.com/shinybow-8x8-vga-audio-cat5-matrix-switch-rackmount-with-rs232-and-infra-red-remote-sb-8188ct-p44876.htm Shinybow new SB-8188CT 2100 Video Switches > Cat5 Audio Video Matrix Switch 18 lb 6 February 2012 08:16 CST The ATEN VanCryst VM0808T 8x8 Cat5 A/V Matrix Switch is an affordable yet versatile VGA solution for redirecting all, or any of eight A/V inputs to any, or all of 8 A/V destinations. Video and audio are independently switchable, and an RS232 connection allows the use of serial devices such as touch screens, bar code readers, or card readers (not independently switchable) The VM0808T is controllable locally via the front panel menu / switch arrangement, or by an RS232 connection from a computer. Remote operation is obtained through a browser or a Telnet session. The browser and local RS232 connection use an intuitive switching matrix GUI to simplify video and audio routing For even more versatility the VM0808T has local A/V ports that may be controlled along with the CAT5 connections and the unit has the ability to be cascaded one tier for a total of 16 source devices and 16 display devices. For security a there are three user levels and password protection [ the requirement can be disabled ] The VM0808T is designed to work in conjunction with the VE500 Audio / Video / RS232 extender system , the maximum distance between transmitter and receiver depends on which VE500 receiver is used: VE500R: 1920x1200@60Hz - 100 ft, 1600x1200@60Hz - 500 ft VE500RQ: 1920x1200@60Hz - 500 ft, 1280x1024@60Hz - 1000 ft Cat5 Audio Video Matrix Switch http://www.smartvm.com/aten-vm0808t-8x8-cat5-audio-video-matrix-switch-p45765.htm http://www.smartvm.com/ImagesCache/aten-vm0808t-8x8-cat5-audio-video-matrix-switch-i32086.jpg http://www.smartvm.com/aten-vm0808t-8x8-cat5-audio-video-matrix-switch-p45765.htm ATEN new VM0808T 1700 Video Switches > Cat5 Audio Video Matrix Switch 15 lb 8 December 2011 08:16 CST